Specials through

All Brake Pads on sale this month.

Products 1-10 of 10
Show
Harley EZ-Just mixture screw from CV Performance
Price: $18.95
Retail: $26.95
(19)
Availability: In Stock
CV Performance Item #: CVP-EZ001 -

The original EZ-Just mixture screw for Harley CV carburetors adjusts the air idle mixture. Easily tune and adjust your idle mixture without burning your hands or fumbling with a screwdriver. CV Peformance has exclusively provided Harley riders with the EZ-Just for over 20 years. Special through - only $18.95 Compatible with all Harley CV style carburetors and replaces the stock mixture screw. Available for CV and CVK Keihin carburetors 1990-2006. Not for use on pre-90 big twins or pre-89...

S&S 551CE Easy Start Cams
Price: $295.95
Retail: $428.99
Availability: Limited Stock
S&S Cycle Item #: 106-4947 -

S&S Easy Start Cams for Twin Cam 2007-2016 (or 06+ Dyna). Only 1 set availableThis was purchased for a customer who did not pick up. Ships for FREE. Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression. This is a bolt-in cam set designed for stock or mildly modified touring or cruiser bikes. 551 cams are not recommended for compression ratios above 10:1. Greatly improves low-end and midrange torque, strongest from idle-4000rpm. Features:Chain drive cams includes installation...

Mighty-Mite black cooler for Harley
Price: $328.99
Retail: $339.00
Availability: In Stock
Hammerhead Engineering Item #: MM-B -

MIGHTY-MITE FEATURES Smallest size air cooling system on the market. Plug and play wire harness complete with a Deutch plug that plugs into the accessory switch plug on Harley’s equipped with that feature. Also included are all electrical parts required if direct battery hook up is preferred. Mighty Mite also includes a new heavy duty Vibration Damper that better positions the unit for the strongest and most desired installation. Smart engineering assures easy and accurate installation which...

Mighty-Mite cooler for Harley
Price: $348.99
Retail: $359.00
Availability: In Stock
Hammerhead Engineering Item #: MM-C -

MIGHTY-MITE FEATURES Smallest size air cooling system on the market. Plug and play wire harness complete with a Deutch plug that plugs into the accessory switch plug on Harley’s equipped with that feature. Also included are all electrical parts required if direct battery hook up is preferred. Mighty Mite also includes a new heavy duty Vibration Damper that better positions the unit for the strongest and most desired installation. Smart engineering assures easy and accurate installation which...

Harley Carburetor Vacuum Slide
Price: $38.95
Retail: $48.95
(7)
Availability: In Stock
CV Performance Item #: CVP-SLIDE -

Complete vacuum slide assembly for Harley CV carburetors. Replaces original H-D p/n #27585-88. Slide replacement is recommended when the diaphragm eventually becomes pinched or torn, or if the vacuum port hole has been modified by drilling 1/8" or larger causing driveability problems. Fits all Harley CV 40 carburetors: Big Twin 1990-2006 or Sportster 1989-2006. Not for use on other Keihin CV carburetors. * Special through - only $38.95****Special discounted pricing, other discounts or coupons...

Accelerator Pump Diaphragm for Harley carburetors
Price: $9.95
Retail: $14.95
(3)
Availability: In Stock
CV Performance Item #: CVP-ACC2 -

CVP's exclusive Premium Accelerator Pump Diaphragm replaces worn or cracked diaphragms on Harley CV and Harley Keihin butterfly carburetors. Perfect fit, no more stretching or misaligned seals. Greater resistance to mild fuel additive exposure commonly found in pump gas. Will outlast many standard diaphragms when Ethanol* enhanced fuel is occasionally used. Improved fit on both stock Harley carburetors and S&S Super E or G. Sold individually, diaphragm only. Replaces Harley p/n 27361-76A found...

Harley manifold boot seal
Price: $5.95
Retail: $12.95
(3)
Availability: In Stock
CV Performance Item #: CVP-INTBOOT -

NEW! CVP's exclusive Premium Intake Manifold Boot Seal for Harley CV carburetors. Finally a manifold boot seal that seals correctly! Improved fit for a positive seal on all Harley models using slip fit (spigot) CV carburetors. Greater resistance against drying and cracking. Firmly provides a tight leak-free seal to cure vacuum leaks.   Replaces the old factory boot seal between the carburetor and manifold.  Old, worn, or even some aftermarket manifold boot seals can be loose or fail...

CV carburetor premium renewal kit
Price: $16.95
Retail: $19.95
(2)
Availability: In Stock
CV Performance Item #: CVP-CVRBLD -

Introducing our exclusive Premium Renewal Kit for Harley CV style carburetors. The kit contains the most common seals and gaskets needed to renew your Harley CV carburetor using our premium seals and gaskets. For use with all 1990-2006 Big Twin or 1989-2006 XL models using the Harley CV 40 carburetor. CVP Premium Accelerator Pump Diaphragm- Superior material outlasts many other diaphragms.- Resists the harmful effects of modern pump gas. Float needle valve- 4 side body design with long lasting...

Harley carburetor chrome cover
Price: $13.95
Retail: $18.95
Availability: In Stock
V-Factor MID-USA Item #: VF-82307 -

Chrome plated CV Carburetor top cover with chrome mounting screws. Fits Big Twin 1990/Later & Sportster 1988/Later. Replaces HD# 27040-88 & 27129-88 Special through - only $13.95 Imported by MID-USA® ...

CV Performance logo hats
Price: $12.95
Retail: $19.99
Availability: In Stock
CV Performance Item #: CVP-HAT -

CVP Logo hat from CV Performance. On Sale for a limited time!Color embroidered logo on a 100% cotton black baseball cap. Velcro closure to fit any size skull.