KLR 650

Replacement packing for use with the EZ-Just mixture screw or stock mixture screw. Includes the Viton® o-ring, washer, and spring that can be lost when removing the original mixture screw. These repack parts are a CVP exclusive and not available from the factory. Fits Harley Keihin 'Butterfly' and CV style carburetors 1981-2006. This packing kit also fits many CVK carburetors including: CVK40, CVK36, and CVK34 carburetors.* Note that in areas now using Ethanol as a 10% fuel additive, replacing...

CVP performance slide spring for Harley CV carburetors and Keihin CVK40. Special tension design provides improved throttle response while eliminating "slide bounce" encountered with cut or shortened race model springs. American made from stainless steel and available for the following CV carburetor models:1989-2006 Big Twin and Twin Cam1988-2006 Sportster 883-1200 models1987-2018 KLR650 using Keihin CVK40Improves performance and throttle response without the need to drill the original slide....

Replacement screw kit for the float bowl screws found on Harley CV carburetors and KLR650 CVK40 carburetors. Replace those stock factory screws which commonly strip after removal. These quality stainless steel screws will stand up to repeated removal and all weather conditions. Includes stainless steel socket head screws, washers, and a metric hex key. Note that appearance of all products are subject to change. 

Complete vacuum slide piston assembly for Keihin CVK40 carburetors found on KLR650 motorcycles. Replaces the original Kawasaki p/n 43028-1062. Slide replacement is recommended when the diaphragm eventually becomes pinched or torn, or normal wear has led to driveability problems. Our slide is now tumble finished and uses a stronger diaphragm for improved durability. Fits Keihin CVK 40mm carburetors on the following models: KAWASAKI KLR650 1987-2018 KAWASAKI KLR600 1985-1986 KAWASAKI Tengai -...

Float fuel valve w/clip for 1988-2018 Kawasaki CVK40 carburetors. Commonly found on KLR650 models. Replacement for Keihin / Kawasaki part number 16030-1057.  Note: See your factory service manual or consult a service technician if not already familiar with the service procedures required for installation.  Fits various Kawasaki models, verify your model accepts part number 16030-1057 before purchase.  We are unable to exchange float valves if you order the...

Carburetor bowl gasket seal for Kawasaki CVK 40 carburetors. Replaces OE p/n 92055-1222. For use with 1987-2004 Kawasaki models using the Keihin CV40. Commonly found on KLR650 models and some Vulcan models. Also fits various Triumph and Suzuki models, see part numbers below.  Special - only $5.95 Bowl Gasket Seal - Quality seal replaces dried or cracked bowl seal.- Replaces Kawasaki p/n 92055-1222, Suzuki p/n 13258-26E00, Triumph p/n T1241036...