Carburetor Parts

Float fuel valve w/clip for 1981-1989 Harley Keihin butterfly carburetors. Replacement for OEM p/n 27886-78A. *3-Sided OE replacement version.  *Only order if you are replacing a 3-Sided valve. Not for use where 4-side valves are previously installed. Note: This item is OEM and therefore requires use of a factory service manual to install if not already familiar with the procedure. We also carry the 4-sided version of this float valve. Refer to the float setting in your factory...

Complete vacuum slide valve piston assembly for Keihin CVK40 carburetors found on Kawasaki Vulcan and KLR motorcycles . Replaces the original Kawasaki p/n 16126-1170 and 16126-1325 on single CVK 40 carbs only.  Fits Keihin CVK 40mm carburetors on the following models: KAWASAKI Vulcan VN1500 1996-2004 with single CVK40 or single CVK36**KAWASAKI KLR650 1987-2018 with CVK40KAWASAKI KLR600 1985-1986Other models using the single Keihin CVK40 carburetor** ** IMPORTANT - Verify your...

Complete vacuum slide valve piston assembly for Keihin CVK40 carburetors found on KLR650 motorcycles. Replaces the original Kawasaki p/n 43028-1062 and 16126-1325. Slide replacement is recommended when the diaphragm eventually becomes pinched or torn, or normal wear has led to drivability problems. Fits Keihin CVK 40mm carburetors on the following models: KAWASAKI KLR650 1987-2018 KAWASAKI KLR600 1985-1986 KAWASAKI Tengai - KL650B 1990-1991 KAWASAKI KLE300B - Versys-X 300 2017 KAWASAKI Versys...

Float fuel valve w/clip for 1988-2018 Kawasaki CVK40 carburetors. Commonly found on KLR650 models. Replacement for Keihin / Kawasaki part number 16030-1057.  Note: See your factory service manual or consult a service technician if not already familiar with the service procedures required for installation.  Fits various Kawasaki models, verify your model accepts part number 16030-1057 before purchase.  We are unable to exchange float valves if you order the...

Carburetor bowl gasket seal for Kawasaki CVK 40 carburetors. Replaces OE p/n 92055-1222. For use with 1987-2004 Kawasaki models using the Keihin CV40. Commonly found on KLR650 models and some Vulcan models. Also fits various Triumph and Suzuki models, see part numbers below.  Special - only $6.95 Bowl Gasket Seal - Quality seal replaces dried or cracked bowl seal.- Replaces Kawasaki p/n 92055-1222, Suzuki p/n 13258-26E00, Triumph p/n T1241036...

Complete CV40 Carburetor for Harley Motorcycles Replacement CV40 carburetor for 1992-2006* Harley models. Our CV carburetor assembly comes complete with high quality CV Performance® brand upgrade components. DEALER ITEM - Requires professional installation→ Contact CVP for purchasing details, we are only accepting dealer orders at this time.For professional installation only - Tuning and installation support is Not Provided. Please consult a qualified service technician as needed....

Complete rebuild kit for Mikuni HSR 42 and 45 carburetors. SALE - Blemished Kits. These kits were stored by the supplier in a humid warehouse and therefore the brass needle seat may be tarnished or require cleaning before installation. Offering these Cycle Pro kits as a close-out at this reduced price while supplies last. Included in kit:(1) Float needle and brass seat with o-ring(1) O-ring(1) Gasket(6) O-rings(1) Flat O-ring(1) Rubber boot(1) E-clip(1) Plastic washer(4) #8-32 x 7/16 in....

Enrichener choke cable for Harley CV carburetors. Replaces original p/n #29229-88D cable and all other Harley CV enrichener cables for big twin and Sportster. The OE cable is ideal when used with our choke bracket and has a shorter rigid section to prevent interference with the fuel inlet elbow. Close out item while supplies last Replacement for Harley p/n 29229-88D and 29236-90 See p/n 29238-92 for the shortest available cable. Import clearance item Fits all Harley CV...

Rebuild kit for Harley CV style carburetors. Imported item by Cycle Pro*. Discontinued Blowout Sale - Out of StockWhile supplies last on this Closeout Item - ONLY $19.95Alternate part, use our CVP Basic Renewal Kit or Premium CV Carburetor Rebuild Kit We have a limited supply of these import style kit from a dealer liquidation - As-Is Closeout Kit is supplied as an OEM parts-only kit and may require a factory service manual to properly install all components. Only for use on Harley CV...